Free design service

After-Sales Service

Delivery 24 / 48 hours

Reference

Toki Clear Standard Sizes manual Clear PVC outdoor roller blind with side cable guides

Toki Clear Standard Sizes manual is the clear PVC outdoor roller blind, 250 cm high, that we make in our own workshop in Italy. It encloses verandas, porches and balconies and shelters them from rain and side winds, with no building work.

  • Manual, with a self-locking winch: it glides smoothly and stops at any height.
  • Low-shrink crystal-clear PVC: withstands heat and cold, stays clear and holds its size over time (shrinkage under 1%).
  • Tens-Flow technology: spring-tensioned cables and a weighted bottom bar; the blind drops straight and stays taut, even in the wind.
  • Minimalist design: decorative covers hide the technical components.
  • Cable tensioners fix to the floor or the wall.

You can add a motor later on.
Find the motorised version here.

Get fabric samples delivered to your door Order your samples here

Choose options

Total price

€ 1,004.27
VAT included
truck
truck
Order now and receive it by 
with DHL Express

Free design service

After-Sales Service

Delivery 24 / 48 hours

Product Details

Crystal PVC panel

Stays transparent and does not shrink

When you close the veranda for the cold season, the panel must drop straight and cover exactly the space you measured. That is why the Maanta Style Centre, our design studio in Italy, chose a 625 g/m² crystal PVC with shrinkage below 1%: it maintains its dimensions over time and stays taut between the guide cables.

The transparency is also preserved: if you fold or pinch the panel, no white marks appear, and over the years the PVC does not turn opaque. The view outside remains clear.

Crystal PVC panel

Stays transparent and does not shrink

When you close the veranda for the cold season, the panel must drop straight and cover exactly the space you measured. That is why the Maanta Style Centre, our design studio in Italy, chose a 625 g/m² crystal PVC with shrinkage below 1%: it maintains its dimensions over time and stays taut between the guide cables.

The transparency is also preserved: if you fold or pinch the panel, no white marks appear, and over the years the PVC does not turn opaque. The view outside remains clear.

Key Features

Operation
Bottom bar

The panel always drops straight

The weighted bottom bar (approx. 1.65 kg per metre) keeps the panel vertical and glides along the cable through a wide loop.

Operation

Stops at any height

The 1:11 self-locking winch holds the position: turn the folding handle and the panel stays at any height, with no stops or electricity required.

Tens-Flow Technology

Panel stays taut even in the wind

Two spring-tensioned cables guide the fabric to the ground and keep it taut at any height.

Assembly

Assembled one piece at a time

The top plate comes in two pieces to make installation easier: fix the bracket, mount the winch and winding shaft, then close with the cover.

Operation
Optional

Can be motorised later

The 12V motor, sold as an accessory, replaces the winch: you can motorise it even after purchase, with solar recharging.

Anchoring

Floor or wall fixing

The lower anchor locks the cable under tension and is designed to be fixed to either the floor or the wall.

Discover the fabric

Clear®

Transparent PVC panel that protects from rain and wind while letting light through, and provides insulation from the cold. It resists bad weather, UV rays and tearing between -10 and +70 °C, is soft to the touch and free from harmful chemicals.

Material
PVC
Weight
625 g/m²
Colour
Transparent

Protection levels (from 0 to 5):

  • Sun: 0 out of 5
  • Heat: 1 out of 5
  • Rain: 5 out of 5
  • Cold: 5 out of 5
  • View: 0 out of 5
Download the technical datasheet for Clear (PDF, opens in a new tab)

21st-century craftsmen

Every Toki Clear takes shape in our workshop in Italy, in Gambellara: we cut the panel to the measurements you send us, we prepare the winding shaft, bottom rail and cables, and in just a few days the roller shade is ready to ship.

If you are also considering a fabric panel, the differences compared to Purishade® and Braidd5® are explained in the fabric guide.

21st-century craftsmen

Every Toki Clear takes shape in our workshop in Italy, in Gambellara: we cut the panel to the measurements you send us, we prepare the winding shaft, bottom rail and cables, and in just a few days the roller shade is ready to ship.

If you are also considering a fabric panel, the differences compared to Purishade® and Braidd5® are explained in the fabric guide.

What makes the difference

Fabric samples

DIY installation

Alexa and Google compatible

Free design service

Everything included

Direct from the manufacturer

Fabric samples

DIY installation

Alexa and Google compatible

Free design service

Everything included

Direct from the manufacturer

Hear what our customers have to say

Get inspired

Toki Clear or Sengia Zip Clear? Two ways to enclose a side


Toki Clear

Sengia Zip Clear

Side guidance


Spring-tensioned cables


Zip guide rails

Screen edges

Guided by the cables

Enclosed in the rails

Screen

Transparent, low-shrinkage crystal-clear PVC

Transparent, low-shrinkage crystal-clear PVC

Operation

Manual or 12 V motor

Motorised, battery and solar panel included

Versions

Standard manual, standard motorised, made to measure

Standard motorised and made-to-measure motorised

Sizes

- Standard 250 cm high in 12 widths

- Made to measure up to 400 × 300 cm

Up to 390 × 300 cm

Where it works best

Verandas and porches to enclose in winter

Pergolas and terraces to enclose while keeping the view

Everything you need: guides and instructions

Document / Video Action
Installation, use and maintenance manual – motorised

Technical datasheet

Type

Outdoor clear PVC shade, roller shades with side cable guides, in standard sizes, manual version

Available sizes

Height 250 cm, 12 widths from 150 to 350 cm

Fabric

Transparent low-shrinkage clear PVC, 0.50 mm, shrinkage below 1%

Side guides

Ø 3 mm steel cables tensioned by springs

Structure

Anodised aluminium and AISI304 stainless steel

Operation

Self-locking winch with folding rod, can be motorised later

Installation

Wall or ceiling mounted; lower fixings to the floor or wall

Depth when closed

Approximately 10-12 cm

Packaging

One parcel of approximately 150 cm

Warranty

2 years

Production

Designed and made in Italy in Gambellara, in the Maanta workshop

toki-clear-std-man-img-inf

Stainless steel plates and
self-locking winch

AISI304 wall or ceiling

plates and 1:11 winch, operated

with the folding crank rod

Ø 75 mm aluminium
roller tube

In joined sections,

delivered in a single package

Crystal-clear PVC
with low shrinkage

Transparent, 0.50 mm,

shrinkage below 1%

Spring-tensioned cables

Ø 3 mm steel cables keep

the screen taut at any height

Weighted bottom bar

About 1.65 kg per metre,

hidden in the screen pocket

Bottom anchor

Locks the cable under tension,

on the floor or wall

Aluminium intermediate bar

Divides the screen into sections, keeps it

taut and stops it from sagging.

Type

Outdoor clear PVC shade, roller shades with side cable guides, made to measure

Available sizes

Height 250 cm · 12 widths: 150, 180, 200, 220, 240, 250, 260, 280, 300, 320, 340, 350 cm

Shape

Rectangular, square

Fabric width

Approximately 104 mm less than the ordered width, on average 52 mm per side

Fabric

Transparent low-shrinkage clear PVC · 0.50 mm thick · 625 g/m² · Shrinkage below 1% · Waterproof

Over time

Clear PVC may yellow slightly after 5-7 years

Operating temperature

Do not operate below +5 °C: at low temperatures the PVC stiffens

Structure


Intermediate bar

Aluminium profile that divides the clear PVC fabric into sections: it keeps it under tension and prevents the PVC, heavier than a fabric, from sagging

Roller

Extruded 6060 aluminium, Ø 75 mm, in jointed sections. No cassette: when the shade is rolled up, it remains visible

Bottom bar

6060 T5 aluminium, cylindrical Ø 25 mm, in jointed sections with internal ballast (approximately 1.65 kg/m), slotted into the bottom pocket of the fabric. End cap with Maanta logo

Side guides

One Ø 3 mm steel cable per side, kept under tension by springs on the upper brackets and secured at the bottom in the lower fixing

Supports and plates

AISI304 stainless steel. Two-piece top plate (support and cover). Bottom fixing to floor or wall

Springs

Galvanised spring steel

Finishes

Natural silver anodised aluminium · Brushed stainless steel. Suitable for coastal areas

Power supply


Operation

Self-locking winch with folding rod, can be motorised later

Manual operation

1:11 worm-gear winch, self-locking, self-lubricating and sealed · Folding anodised aluminium crank handle, approximately 120-150 cm · Right- or left-hand side, your choice

Motor

Optional, sold separately: 12 V tubular motor inside the winding shaft · Torque 13 Nm · 13 rpm, adjustable · Electronic limit switches · IP44, protected against water splashes. Replaces the winch

Controls

Operating rod. With the optional motor: 15-channel remote control, WiFi Bridge, anemometer

Packaging and warranty


Installation

Wall or ceiling mounted with universal bracket. Not side-mounted, not in a recess, not inclined. Two fixing points with three anchors each, with no intermediate brackets

Depth when closed

Approximately 10-12 cm from the mounting surface, brackets included

Weight

Approximately 8-12 kg in the 240 × 220 cm size

Packaging

One parcel of approximately 150 cm

Package contents

Delivered unassembled. Winch kit (1:11 winch, winch square drive and cap, screws) · Plate kit (support plate and cover plate) · Idle side kit (pin and plate for winding shaft, O-ring, split pin, screws) · Fabric tensioning kit (upper cable clamp, spring holder, springs, cable locking cylinders, anchoring washers, cutters) · Bottom bar end caps · Winding shaft, fabric and weighted bottom bar · Side cords · Aluminium intermediate support · Folding crank handle.

Not included but required

Wall plugs, to be chosen according to the surface

Optional accessories

12V motor · Motor kit + remote control + solar panel · Motor kit + remote control + battery charger · Solar panel · Battery charger · 15-channel remote control · Wi-Fi Bridge · Anemometer · Operating rod

Warranty 2 years
Production

Designed and made in Italy in Gambellara, in the Maanta workshop

Read less -

Read more +

What you receive with standard manual Toki Clear

DIY installation

Watch the video guide

Need an installer?

We will help you find a trusted professional in your area, at no extra cost.

FAQ

FAQ

The version of Toki with a clear PVC panel: an outdoor roller blind guided by two spring-tensioned cables, for enclosing verandas, porches and balconies while letting light and views through.

Toki Clear is the next step up from Easy Clear. The cables are kept at constant tension by springs, the bottom bar is a weighted cylinder enclosed in the panel that slides along the cable without catching, and the stainless steel bracket works for both wall and ceiling.

On porches, pergolas, canopies, balconies, verandas, terraces, windows and French doors, fixed to the wall or ceiling. It can't be fitted sideways, inside a recess or at an angle.

Toki Clear in Standard Sizes comes in twelve sizes, from 150 × 250 to 350 × 250 cm: the height is always 250 cm, and the width ranges from 150 to 350 cm. If you need another size, made-to-measure Toki Clear goes up to 400 × 300 cm.

Yes, you can order fabric samples and see the colours and fabrics in person.

The manual version is operated with the crank rod and stops at any height, with no power needed. The motorised version is controlled by remote or smartphone and recharges with the solar panel. You can also start with the manual version and motorise it later.

No, the anodised aluminium roller tube stays visible when the blind is rolled up. When closed, it projects about 10–12 cm from the wall or ceiling, brackets included.

It's a 0.50 mm transparent PVC weighing 625 g/m², with less than 1% shrinkage: it holds its dimensions over time and stays taut between the cables.

Yes, the clear PVC is waterproof and keeps rain out of the space. At the sides, the panel is guided by the cables rather than enclosed in rigid tracks, so when wind drives the rain sideways, a little water can get in at the edges.

A 3 mm steel cable runs along each side of the panel. At the top, springs mounted on the brackets keep it under tension; at the bottom, it's locked into the bottom fixing, attached to the floor or wall: the panel stays guided and taut all the way up and down.

It's the aluminium bar that divides the clear panel into sections. PVC is much heavier than fabric: the intermediate bar keeps it taut and stops it from sagging.

Guided by the tensioned cables and weighted by the bottom bar, the panel stays taut and doesn't flap, even when you stop it halfway. In strong wind, though, it should be rolled up: on the motorised version, the anemometer does this automatically when the wind exceeds the set threshold.

Yes, it's designed to enclose verandas and porches in the cold season. Below +5 °C, the PVC stiffens: in those conditions, don't operate the blind and leave it where it is.

Weighing about 1.65 kg per metre, it keeps the panel vertical at all times. It's a 25 mm aluminium cylinder enclosed in a fabric pocket, so you can't see it, and it slides along the cable through a wide eyelet.

With the 15-channel remote, which controls up to fifteen blinds, or from your smartphone with the WiFi Bridge, compatible with Alexa, Google Home and IFTTT. With the anemometer, the blind rolls itself up when the wind exceeds the threshold.

Both, with the same universal AISI304 stainless steel bracket: no special kits needed.

To make fitting easier: you fix the bracket to the wall or ceiling through the slots, mount the crank gear, roller tube and springs, and finish by closing it with the cover, secured with countersunk screws.

The assembly hardware is in the box. Wall plugs aren't included, for either the top plates or the bottom fixings: choose ones suited to the surface you're fixing the blind to, whether wall, ceiling or floor.

Yes, the blind is designed for DIY fitting with the included instructions. For larger widths, it's best to have two people to lift and position the roller tube.

Yes. The 12V motor replaces the crank gear, so the two aren't fitted together. Each blind needs its own motor and its own solar panel.

With the solar panel, which keeps the battery charged, or with the external jack charger. On a full charge, the blind runs about 200 open-and-close cycles.

Two years of legal guarantee, handled directly by Maanta.

Manufacturing defects, material flaws and mechanical malfunctions.

Roll up the blind: wind damage beyond the operating limits isn't covered by the guarantee. On the motorised version, the anemometer rolls it up automatically.

Report the damage to customer service with your order number and a few photos: we'll take care of the replacement.

Inspiration space

Share your Maanta moments with #mymaanta

Questions and answers

Do you have doubts or questions about this item?

Feel free to ask!

Your questions will also help other users.

Alternatively, contact our customer service who will guide you with personalised advice.

21st-century artisans

Where Italian tradition meets
modern innovation

Expert hands guide intelligent machines.
Time-honoured knowledge meets cutting-edge technology. At Maanta,
craftsmanship hasn't stopped at the past: it has evolved
to create products that stand the test of time and improve everyday life.

Maanta - Artigiani del XXI secolo